Products /


 

Kale Lüks Sentetik Boya
Lux Synthetic Glossy Interior and Exterior Paint

Product Definition
Alkyd resin based, lead-free, top coat luxury glossy paint.

Application Areas
> On interior and exterior surfaces of wooden, iron-steel, concrete, exposed concrete, plaster, cement board, plasterboard, OSB, MDF and on furniture with a suitable primer.

Features
> Superior hiding power.
> Has high and permanent glossiness
> Perfectly adheres to surface; scrub-resistant.
> Lead-free.
> Tintable by RENK USTASI.

Technical Features
(at 20°C and 65% RH)

General Data:
Colors: White, 32 colors in color card and thousands of colors possible by Renk Ustası
Composition: Alkyd resin based
Thinner: Synthetic thinner
Density: Approx. 1,21 gr/cm³
Flash Point: 36°C
Glossiness (60°): >88

Application Data:
Application Temperature Range: (+5°C) - (+30°C)
Drying Time:
For 2nd coat application / 24 hours
Touch dry / 3-4 hours
Dry through / 12 hours
Lower temperatures and/or higher relative humidity will lengthen the drying process.
Consumption (at 25±5 µm dry film thickness): Depending on the type and absorbency of the surface, 18-20 m² of area can be painted in a single coat with 1 lt
Application Tools: Brush, roller, airless spraying equipment

Application Instructions
> The surfaces, on which the product will be applied, must be cleaned off from grease, dirt, rust and swelled paint residues.
> Previously painted mineral and wooden surfaces must be rubbed with emery, must be cleaned and primed with Kale SENTETİK ASTAR. The rust on old painted metal surfaces must be removed by emery. If there is no rust, the surface must be primed with Kale SENTETİK ASTAR, then rubbed with emery and painted with Kale LÜKS SENTETİK BOYA.
> The wooden surfaces, which will be painted for the first time, should be saturated with wood impregnate at first. Kale ANTİPAS must be applied in two coats on the iron-steel surfaces which will be newly painted.
> Kale LÜKS SENTETİK BOYA should be thinned with synthetic thinner at 5-10% ratio and mixed well, to be applied with brush, rolle or spraying system.
> The prepared surface should be rubbed with emery and Kale LÜKS SENTETİK BOYA should be applied after 24 hours. There must be 1 day between the coats in two-coat applications.
> In airless spraying; pressure must be 120-140 bars, nozzle angle must be 50°, nozzle measurement must be 0,013 inch.
> Clean the tools with synthetic thinner immediately after the application.
> Ambient temperature must be between 5°C-30°C during the application.

Warnings

> R 10: Flammable.
> R 65: Harmful: may cause lung damage if swallowed.
> S 1/2: Keep locked up and out of the reach of children.
> S 13: Keep away from food, drink and animal foodstuffs.
> S 20: When using, do not eat or drink.
> S 45: In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
> S 46: If swallowed, seek medical advice immediately and show this container or label.
> S 53: Avoid exposure. Obtain special instructions before use.
> S 56: Dispose of this material and its container at hazardous or special waste collection point.

Storage
> The product can be stored in its unopened original package in cool and dry environment at least 1 year. When a certain amount remains in the package, in order to store the remainder paint in the safest way, thinner must be added until the surface of the paint is completely covered, or the package must be firmly closed and turned 180° for 1-2 times.

Packaging
> 0.75 lt, 2.5 lt, 3.75 lt and 15 lt metal pails.
> 0.75 lt packages are packed together in 6s, 2.5 lt and 3.75 lt packages are packed together in 2s.

Quality Documents
TS 39 (Type 1)



Back Back  Top Top Print Print

 

Kale Kalekim Corporate                  Kalekim Facebook Kalekim Blog Kalekim Twitter

Türkçe    > English    Русский