KALEPOLYMAS
Flexible Polyurethane Sealant
Product Definition
One-component polyurethane sealant for filling joints.
Application Areas
> Sealing expansion joints of building materials.
> Vertical and horizontal sealing of prefabric construction materials
> Sealing floor joints in ceramic and porcelain floor tiles in areas subject to heavy traffic such as supermarkets,
> Flexible sealing around pipelines, outlets, drains made of metal, wood, PVC.
> Sealing of expansion joints of internal and external places subject to movement up to 25% in supermarkets, car parks, shopping centres, warehouses.
Features
> Good adhesion to almost all materials that are commonly used in building.
> High mechanical strength.
> Abrasion resistant.
> Easy to apply on both horizontal and vertical surfaces.
> Elastic.
> Remain unchanged even after many years of industrial pollution, sudden temperature changes and immersion in water.
Technical Features
(at 23°C and 50% RH)
General Data:
Appearance: Grey or White paste
Shelf Life: 12 months in original sealed cartridges and sausages
Application Data:
Application Temperature Range: (+5°C)-(+40°C)
Absolute Curing: 2.5 mm / 24 hours
Open Time: 75-90 minutes
Performance Data:
Hardness Shore A (DIN 53505): 25
Modulus at 100% Elongation (ISO 8339): 0.25 N/mm²
Elongation at Breaking Point (ISO 8339): 250%
Elastic Recovery (ISO 7389): > 70%
Movement Capability (ISO 11600): 25%
Resistance to Flow (ISO 7390): < 3 mm
Service Temperature Range (after final cure): (-30°C)-(+80°C)
Application Instructions
> All substrates must be dry, solid and sound, free of dust and crumbling parts, oils, grease, wax, old paint and rust.
> In order not to dirty the stone tiles and slabs, it is recommended to use masking tape on the sides of the joints before applying KALEPOLYMAS.
> Cut the tip of the cartridge and screw on the nozzle which should be cut at 45° to produce a hole corresponding to the size of the joint.
> Insert the cartridge or sausage into the gun and extrude KALEPOLYMAS.
> Smooth the surface of KALEPOLYMAS with soapy water before skin formation.
> Use cord fillers appropriate to width of joint. Width of the joint should be 5-40 mm and the depth 5-20 mm
> The thickness of KALEPOLYMAS applied should be lower than or equal to the width of the joint.
> Remove the masking tape and clean the uncured KALEPOLYMAS from tools and contaminated surfaces with white spirit. Cured KALEPOLYMAS can only be removed mechanically.
> Protect the surface from washouts at least during the first 24 hours after application.
> UV lights can change the color of the product, however mechanical properties are not effected.
Warnings
> For further information refer to safety data sheet.
Storage
> Store temperatures from 5°C to 25°C in original sealed packaging.
Packaging
> 310 ml. Cartridge,
> 600 ml. Sausages.
|