Çerezler, içeriği ve reklamları kişiselleştirmek, sosyal medya özellikleri sağlamak ve trafiğimizi analiz etmek için kullanılmaktadır. “Kabul Et” seçeneği ile tüm çerezleri kabul edebilirsiniz veya “Çerez Ayarları” seçeneği ile ayarları düzenleyebilirsiniz.Çerez Politikası

Country and Language Selection
Cancel
There were no results
PERFORMA

PERFORMA

Elastic Water Based Exterior Wall Paint

General Information
Definition
Elastic acrylic emulsion based, elastic, water impermeable, matt, exterior wall paint
Usage Areas
On suitably prepared exterior mineral surfaces such as concrete, mortar, cement panel, etc. and on previously painted surfaces.
Package
  • 2.5 lt, 7.5 lt and 15 lt pails 2.5 lt packages packed together in 2s
Features
Forms an elastic film; covers the hairy cracks on the surface and resists to movements of the building. Water impermeable; gives perfect protection against rain therefore prevents salt crystallization, frost cracks, algae and fungus formation, chemical corrosion. Can be applied with or without texture. Long lasting; resists to UV rays, rain, heat and frost, thus retains its original properties for yearswithout cracking, blistering and fading. High water vapour permeability, allowing buildins to breathe. Superior hiding power. Solvent free and practically odourless. Water thinnable and ecologically compatible.
Professional Knowledge
Technical Properties (at 23°C and 50% RH)
General Data
 Colors: Thousands of colors possible from a mixture of white and A, B, C, bases using the Renk Bankası and the Renk Ustası
 Composition: Elastic acrylic emulsion based
 Thinner: Water
 Density: Approx. 1.41 g/cm³
Application Data
 Application Temperature Range: (+5°C) - (+35°C)
 Drying Time: Recoatable after 6 hours and thoroughly dry after 24 hours. (Lower temperatures and/or higher relative humidity will lengthen the drying process.)
 Consumption: Depending on the evenness and the porosity of the surface approximately 0.200-0.300 lt/m² per coat
 Application Tools: Brush, roller, airless spraying equipment
Performance Data
 Water Vapour Permeability SD (m) (DIN 52615): Approx. 0.300
Scrub Resistance (cycle)(ASTM 2486): > 300
 Gloss (60°) (ISO 2813): Approx. 4
 Water Absorption (kg/m²h0.5) (DIN 52617): < 0.100
 Service Temperature: (-30°C) - (+80°C)