Country and Language Selection
Cancel
There were no results
Home Page Waterproofing Complementary Products 3353 PROFESYONEL DUREX
3353 PROFESYONEL DUREX

3353 PROFESSIONAL DUREX

Impregnation Waterproofing Surface Protection Material

Find a Dealer
Find a Dealer
General Information
Definition
Silane / Siloxane emulsion based, solvent-free, ready to use surface protection and water repellent primer.
Usage Areas
Impregnation of porous mineral surfaces such as concrete, lime-sand stone, decorative brick, clinker, where waterproofing is required. Priming surfaces of unpolished, absorbent, natural and unnatural stones for protection. Priming of surface before application of the paints and plasters.
Package
  • 10 Lt plastic drum.
Features
Does not change appearance of the surface. Ready to use. Makes the surface waterproof thanks to its deep penetration capability. Does not prevent the water vapor permeability of the surface applied on. Easy to apply with brush, roller or spray gun. Extremely durable; not affected by severe weather conditions like UV, rain and freezing.
Professional Knowledge
Technical Properties
 (at 23°C and 50% RH)
General Data
Appearance: White colour liquid
Density: 1.0 gr/cm3
Shelf life: 12 months when stored in the original unopened packaging.
Application Data
Application Temperature Range: (+5°C)-(+35°C)
Consumption: Approximately 0.2 – 1.0 lt/m²  (Depending on the porosity of the substrate.)
Application Layer: 2 coats (wet on wet)
Drying Time: 24 hours
Penetration: Good
Performance Data
Density : 1,0 ± 0,03 gr/cm3
Water Absorption and Resistance to Alkali (EN 13580): 0.050 kg/m²h1/2