3401 İZOBLOK 2K +

Waterproofing Material

Find a Dealer

Definition

Flexible, two component, solvent free, fiber reinforced bitumen rubber based waterproofing material used on the positive side only for protection against water leakage of construction elements under the ground or in the floor level.

Usage Areas

Waterproofing of sub-base building structure surfaces (horizontal/vertical) which are permanently contact with leakaging or pressurized water and moisture. Waterproofing of foundations, retaining walls and basement walls, green terraces, sub-base car parking areas, basement floors, Waterproofing of interior and exterior mineral surfaces like concrete, stone, brick, plaster, mortar etc.

Package

Available in A+B component 30 kg plastic pails Liquid: 22 kg, Powder: 8 kg

Features

Flexible and crack-bridging. Bridges shrinkage cracks. Forms a seamless moisture and waterproofing membrane. Easy to apply (by brush or trowel) on both vertical and horizontal surfaces. Highly adherent to any mineral substrate such as conctrete, stone, brick. Resistant to aging under the conditions where substrate is exposed to several factors such as salt solutions, chemicals in regular soil and weak acids. Performance will remain the same for several years. Resistant to freeze-thaw cycles. Suitable for areas and surfaces where vibration or motion exists. Can be used on brick walls without plastering. Solvent free.

Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

Appearance: 1st component: Black-brown liquid; 2nd component: Grey powder

Shelf life: 12 months when stored in original sealed packaging

Solid content ratio: 71% ± 1

Application Data

Application Temperature: (+5°C)-(+35°C)

Application Thickness For moisture resistant insulation min. 3 mm dry film thickness For non-pressure water resistance min. 3 mm dry film thickness For pressure water resistance min. 4 mm dry film thickness

Mixing Ratio: 22 kg liquid / 8 kg powder

Pot Life: 2 – 4 hours

Consumption: Approx. 1.0 – 1.5 kg / m² for each 1 mm thickness. (The consumption amounts are theoretical and it varies by the condition of application surface)

Tack-free drying time: 6 hours

Waiting Time Between the Coats: 1-2 hours (depending on the weather conditions)

Complete Drying Time: 1-5 days

Ready to Use Time: 7 days (depending on the curing time)

Performance Data

Density: 1,13± 0,03 gr/ml

Crack Bridging (EN 15812): Class CB2

Waterproofing Capacity: Class W1 (3 mm dry film thickness)

Resistance to Water (EN 15817):

Pass Low Temperature Flexibility (EN 15813):

Pass High Temperature Dimensional Stability (EN 15818):

Pass Durability (EN 15820 & EN 15817):