Cookies are used to personalize content and ads, provide social media features, and analyze our traffic. You can accept all cookies with the “Accept” option or you can edit the settings with the "Cookie Settings" option.Cookie Policy

Country and Language Selection
Cancel
There were no results
Bİ'BOYA FRESH COMFORT

Bİ'BOYA FRESH COMFORT

Ultra Low VOC, Formaldehyde Eliminating Water Based Interior Paint

General Information
Definition
Water-based, acrylic emulsion-based, ultra-low volatile / semi-volatile organic chemical compounds (VOC / SVOC) content and 64% formaldehyde removal feature at the end of 24 hours, increasing the air quality of the environment, friendly to human and environmental health, silky matt wall paint
Usage Areas
● On interiors suitably prepared new mineral surfaces such as concrete, mortar, cement panel, gypsum panel etc. and on old painted surfaces and putty.
Package
  • ● 2.5 L and 15 L pails. ● 2.5 L packages packed together in 2s
Features
It traps formaldehyde, which is released from different sources indoors (furniture, parquet, door, wooden cabinet, cigarette smoke, heater, etc.) and adversely affects human health, and turns it into harmless water vapor and prevents it from being released back. Provides 64% formaldehyde removal at the end of 24 hours. Friendly to human and environmental health with its ultra-low volatile / semi-volatile organic chemical compounds (VOC / SVOC) content. It is registered as A+ according to the French VOC regulation. Compatible with Indoor Air Comfort and Indoor Air Comfort Gold. Complies with LEED certification. The feature of being wiped thanks to its special silk matte texture. High coverage and a natural silky matt appearance. Odourless. Does not leave brush or roller marks
Professional Knowledge
Technical Properties (at 23°C and 50% RH)
General Data
Composition :Acrylic emulsion based
Colours:  Thousands of colours possible from a
mixture of white and A, B,C bases by
using Renk Bankası and Renk Ustası
Density: Approx. 1.47 g/cm³
Tinner:  Water
Application Data
Application Temperature Range (+5°C) - (+35°C)
Drying Time Recoatable after 6 hours and
thoroughly dry after 24 hours.
(Lower temperatures and/or higher relative
humidity will lengthen the drying process.)
Consumption :Depending on the evenness and the porosity
of the surface approximately
0.06-0.1 L/m² per coat.
Application Tools :Brush, Roller, Airless spraying equipment
Performance Data
EN 13300 Class
Gloss: Semi Matt
Contrast Ratio :Class 2 (7 m2
/L)
Largest Grain Size : Thin
Wet Scrub Resistance :Class 1