Cookies are used to personalize content and ads, provide social media features, and analyze our traffic. You can accept all cookies with the “Accept” option or you can edit the settings with the "Cookie Settings" option.Cookie Policy

Country and Language Selection
Cancel
There were no results
2900 FUGAPOOL

2900 FUGAPOOL

Silicone Enhanced Flexible Grouting Mortar for Pools

General Information
Definition
High performance (high resistance to abrasion and reduced water absorption), cementitious flexible grout for 1 to 6 mm joints.
Usage Areas
Floor and wall grouting of wet places like swimming pools, water tanks, bathrooms, balconies, Turkish Bath, sauna, thermal spring,
Package
  • 20 kg multi-ply paper bags. 5 kg polyethylene bags
Features
Resistant against pool chemicals. Approved to be used in contact with water intended for human consumption. High flexibility. Good compressive and flexural strength and good resistance to freeze/thaw cycles. Low water absorption. Low shrinkage, therefore absence of cracks. A smooth final surface. Very good abrasion resistance. Fast curing. UV and climatic change resistance in 7 different colours.
Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

Appearance: White and coloured powder

Shelf Life: Multi-ply paper bags : 12 months Polyethylene bags :24 months when stored in the original sealed packing in a dry place..

Application Data

Mixing Ratio: 5.8-6.4 liters water / 20 kg powder 

                   5.8- 6.4 liters water/20 kg powder 1.45 - 1.6 liters water/5 kg powder

Application Temperature Range: (+5°C)-(+35°C)

Pot Life: 1 hour

Set to Light Traffic: 1 day

Consumption: See consumption table depending on width of the joints and dimensions of the tile.

Performance Data

Flexural Strength (EN 12808-3): ≥ 2.5 N/mm²

Compressive Strength (EN 12808-3): ≥ 15 N/mm²

Flexural Strength (after freeze/thaw cycles) (EN 12808-3): ≥ 2.5 N/mm²

Compressive Strength (after freeze/thaw cycles) (EN 12808-3): ≥ 15 N/mm²

Abrasion Resistance (EN 12808-2): ≤ 1000 mm³

Shrinkage (EN-12808-4): ≤ 3 mm/m

Water Absorption (after 30 min / 4 hours) (EN 12808-5): ≤ 2 g / ≤ 5 g

Service Temperature Range (after final cure): (-30°C)-(+80°C)