Country and Language Selection
Cancel
There were no results
3032 İZOSEAL 2K+

3032 İZOSEAL 2K+

Two Component Crystallized Elastic Waterproofing Mortar

General Information
Definition
Two component, cementitious elastic waterproofing compound applicable from both inside (negative) and outside (positive) directions for interior and exterior concrete and masonry structural elements
Usage Areas
For interior and exterior areas, in vertical and horizontal directions, Waterproofing of bathrooms, showers, Waterproofing of terraces and balconies, Waterproofing of water basins, Waterproofing of foundations, retaining walls, basement walls, Waterproofing of tunnels, Waterproofing of pools, Waterproofing of elevator shaft basements, Waterproofing of marinading pools, Waterproofing of fishponds, Waterproofing of Turkish baths, SPA’s, Waterproofing of concrete, plaster and screed surfaces.
Package
  • Powder component: 25 kg multi-ply paper bags Liquid component: 10 lt drums Set: 35 kg
Features
Resistant for both negative and positive water pressure. Approved to be used in contact with water intended for human consumption. Excellent bonding on all concrete and masonry. Non-corrosive for steel and construction elements. Applicable both on horizontal and vertical surfaces. Prevents carbonation in concrete. Resistant to freeze-thaw. Suitable for light pedestrian traffic. Non-cracking. Easy to apply either by brush or trowel.
Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

Appearance: 1st component: Grey powder 2nd component: White liquid

Shelf life (Powder and liquid): 12 months when stored in the original sealed packaging

Application Data

Application Temperature: (+5°C) - (+35°C)

Mixing Ratio: 10 lt liquid/25 kg powder

Mixing: ~3 mins. with max. 500 rpm mixer

Pot Life: 45 minutes

Consumption (for 1 mm of thickness): 1.4 kg/m²

Waiting Time Between the Coats: 3 - 6 hours

Ready to use: 7 days

Performance Data

Density (EN 1015-6) 1550±100 kg/m3

Impermeability to Water: ≥1 bar (negative) ≥1.5 bar (positive)

Adhesion Strength (EN 14891): ≥1.00 N/mm2

Adhesion Strength (EN 1504-2) :≥0.80 N/mm2

Permeability to Water-Vapour (EN ISO 7783) :Class I ; Sd <5 m

Capillary Water Absorption (EN ISO 1062-3) :< 0.1 kg/m²h0.5

Crack Bridging (EN 1062-7) (21 ºC) :>0.75 mm

(Class A3) Crack Bridging with Mesh (EN 1062-7) (21 ºC) :>2.50 mm

Heat Resistance: (-30°C) - (+80°C)

Dangerous Substances: See SDS.

Reaction to Fire: European classification Cs1d0