Bİ'BOYA ANTI-CONSENDATION COMFORT

Water Based, Full Matt, Interior Wall Paint that Prevents Heat Loss and Sweating

Find a Dealer

Definition

It is an acrylic based, breathable interior finish paint, which has the dullness resembling velvet texture by reducing the thermal loss on wall surface up to 4 times by making thermal insulation effect thanks to micro glass beads in its formula, functioning just line the double glazing.

Usage Areas

It is applied as two layers by using a brush, roller or spraying system by thinning with maximum 10% clean water by volume, 24 hours following the primer application. It must be waited for at least 6 hours between layers. Depending on the roughness and absorbency of the surface, an average of 0,12 - 0,25 lt / m² in one layer.

Package

2.5 lt and 15 lt plastic bucket

Features

Velvety matt texture gives a soft and smooth touch on the walls.It has lower heat permeability coefficient than other interior paints. Thanks to the micro glass beads in the air within, it reduces the thermal conductivity and helps prevent heat loss in the walls. Low heat conductivity and micro glass beads compensate the ambient temperature. Prevents condensation of water vapor on the wall surface. Does not leave roller print and traces of retouching. It allows the buildings to breathe with the ability to exhaust the moisture generated inside. Superior hiding power. It is odourless and is not harmful for human and environmental health as it is solvent-free and is diluted with water.

Professional Knowledge

Technical Properties

(23°C and 50% Relative Humidity)

General Information

Colors: Thousands of colors obtained with Renk Bankası and Renk Ustası from white and A, B bases

Structure: Acrylic emulsion based

Thinner: Water

Density: Approximately 0.88 gr/cm³

Application

Application Temperature: (+5°C) - (+35 °C)

Drying Time: Drying time for applying the second layer is 2 hours

Complete Drying Time: 24 hours (Lower temperature and higher relative humidity prolong drying time.)