Cookies are used to personalize content and ads, provide social media features, and analyze our traffic. You can accept all cookies with the “Accept” option or you can edit the settings with the "Cookie Settings" option.Cookie Policy

Country and Language Selection
Cancel
There were no results
PERFORMA NS

PERFORMA NS

100% Pure Acrylic, Super Elastic, Water Based Matt Exterior Wall Paint

General Information
Definition
Pure acrylic emulsion based, super elastic, fully water impermeable, long lasting, breathable, alkaline resistant, exterior textured wall and semi-matt paint.
Usage Areas
On exterior mineral surfaces such as concrete, mortar, cement panel, etc., and on previously painted surfaces.
Package
  • 2.5 lt and 15 lt pails. 2.5 lt packages packed together in 2s.
Features
Super elastic; covers the hair cracks on the surface up to 3.2 mm and resists to movements of the building and keeps its elasticity in low temperatures Water impermeable; gives perfect protection against rain therefore prevents salt crystallization, frost cracks, algae and fungus formation, chemical corrosion Long lasting; resists to UV rays, rain, heat and frost, thus retains its original properties for years without cracking, blistering and fading Thanks to its 100% pure acrylic based special formula, it provides maximum protection against dirt in the surfaces where it is applied by curing with UV rays High water vapour permeability, allowing buildings to breathe Superior hiding power Solvent free and practically odourless Water thinnable and ecologically compatible
Professional Knowledge
Technical Properties
(at 23°C and 50% RH)
General Data 
Composition : Colours Density Pure acrylic emulsion based Thousands of colours possible from a mixture of white and A, B,C bases by using Renk Bankası and Renk Ustası
Approx. 1.28 g/cm³
Tinner : Water
Application Data 
Application Temperature Range (+5°C) - (+35°C)
Drying Time Recoatable after 6 hours and thoroughly dry after 24 hours. (Lower temperatures and/or higher relative humidity will lengthen the drying process.)
Consumption: Application Tools Depending on the evenness and the porosity of the surface; Textured Pattern: 0.350 – 0.450 L/m² per coat. Flat Finish: 0.100 – 0.160 L/m² per coat (must be applied in 2 coats) Brush, Roller Performance Data 
EN 1062-1 Class Gloss Film Thickness Grain Size Water Vapour Transmission Liquid Water Permeability Crack Bridging CO2 Permeability G2 E4 S1 V2 W3 A5 C0