Silicone enhanced, acrylic emulsion based, pigmented primer with a high penetration for priming the surfaces on which any type of water based decorative coating will be applied.
Usage Areas
Prior to emulsion based coating application on all kinds of porous, highly absorbent surfaces like concrete, plaster, gypsum, gypsum panel and putty
etc., and on old painted surfaces.
Package
2.5 lt, 7.5 lt and 15 lt pails.
2.5 lt packages packed together in 2s.
Features
Silicone content enables deep penetration under the surface reducing water absorption.
Pigmented; provides hiding. Reinforces the substrates, increases the adhesion of surface coating.
Decreases paint consumption by decreasing the absorbency of the substrate.
Solvent free and practically odourless.
Water thinnable and ecologically compatible.
Technical Properties (at 23°C and 50% RH) General Data Colors: Available in white and 19 colors, tintable by Renk Ustası Composition: Acrylic emulsion based Thinner: Water Density: Approx. 1.51 g/cm³ Application Data Application Temperature Range: (+5°C) - (+35°C) Drying Time: Ready for the application of the final coating after 6 hours. (Lower temperatures and/or higher relative humidity will lengthen the drying process.) Consumption: Depending on the evenness and the porosity of the surface approximately 0.090 lt/m² Application Tools: Brush, roller, airless spraying equipment Performance Data Service Temperature: (-30°C) - (+80°C)
)
)
)
)
)
)
)
)
)
)
)