Country and Language Selection
Cancel
There were no results
Home Page Cement Based Waterproofing Products 3022 İZOLATEX 1K
3022 İZOLATEX 1K

3022 İZOLATEX 1K

One-Component Cementitious Mortar for Flexible Waterproofing & Concrete Protection

Find a Dealer
Find a Dealer
General Information
Definition
One-component, crack-bridging, flexible mortar, based on cement modified with waterproofing and workability improving additives used for interior and exterior applications.
Usage Areas
Waterproofing of bathrooms, showers, WC, Turkish baths, spa like wet areas before the tiling. Waterproofing of balconies and terraces before laying ceramic tiles. Waterproofing of swimming pools, water tanks, basins, pipes etc. Waterproofing of internal wall floors against leakage and surface water. Waterproofing of external wall surfaces to be backfilled in ground. It is applied on concrete surfaces which must be protected against sea water salts.
Package
  • 20 kg multi-ply paper bags.
Features
Thanks to its special one-component formulation, it is ready for application by mixing with water only. It provides advantages in transportation and stock. Flexible waterproofing and good crack-bridging ability. It is the ideal waterproofing material before tilting or screed jobs. Good sag resistance and easy to apply, even on verticak surfaces. Can be applied on damp substrates. Prevents carbonation in concrete. Resistant to freeze-thaw. Highly resistant against chloride ions. Easy to apply either by brush, roller or trowel.
Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

• Appearance: Grey colour cement modified powder

• Shelf life:12 months when stored in the original sealed packaging

Application Data

• Application Temperature: (+5°C)-(+35°C)

• Mixing Ratio: 5,5-6,3 lt water / 20 kg bag (by brush) 3,2-4,0 lt water / 20 kg bag (by trowel)

• Pot life : ≥ 120 min at 20°C

• Waiting Time/ Overcoating: 4 days

• Consumption: 0,85-1 kg/m²

Performance Data

•Fresh Mortar Density: 1,35 ± 0,1 g/cm³

• Initial Tensile Adhesion Strength and After Water Contact, Heat Aging, Freeze-Thaw Cycles (EN 1348): ≥ 1 N/mm²

• Tensile Adhesion Strength (EN 1542) ≥ 2 N/mm²

• Freeze Thaw De-Icing Salt Resistance (EN 15687-5) ≥ 1 N/mm²

• Water Penetration Under Pressure (EN 14891): 7 Bar (Positive)

• Crack Bridging Ability (EN 14891) :0.75 mm (+25 °C) - 0.75 mm (-5 °C)