Country and Language Selection
Cancel
There were no results
Home Page Acrylic Based Waterproofing Products 3151 ELASTICOOL
3151 ELASTICOOL

3151 ELASTICOOL

Waterproofing and Coating Material with Solar Reflectance

Find a Dealer
Find a Dealer
General Information
Definition
Acrylic dispersion based, one component, liquid plastic coating and waterproofing material which is highly elastic, and saves energy by reflecting radial heat energy on surface of roofs.
Usage Areas
Waterproofing of the all types of flat or inclined roofs and terraces covered with concrete, plaster, asbestos cement, galvanized steel, zinc, aluminum, PVC, polyester or wood, Exterior waterproofing of buildings. Surfaces of stone, clinker, decorative coatings etc, Old bitumen, bituminous membrane or asphalt covered surfaces, On spray polyurethane foam, Waterproofing protecting and energy saving material.
Package
  • 20 kg. plastic pails.
Features
Ready to use, easily applicable with brush and roller by airless spray method. Low labor cost. 400% elastic. Water vapor permeable. Highly resistant to UV rays. High UV(radial heat) reflectivity. Reduces the temperature within the building and protects the building from excess heat by decreasing the surface temperature. Saves energy by reducing the need of electric energy used for cooling. Strong adhesion to difficult surfaces. Remains flexible at low temperatures. Hard to get dirty. Resistant to extreme weather conditions and aging. Resistant to stagnant water.
Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

Appearance: White liquid

Shelf life: 12 months when stored in the original sealed packaging

Application Data

Application Temperature Range: (+5°C)-(+35°C)

Waiting Time Between the Coats: 4-8 hours

Ready to Use: 3-7 days

Consumption (avr.): 1.5 kg/m² (for 1 mm thickness)

Application (vertical) 2 layers, Thickness: 0.75-1.00 mm

Application (horizontal): 3 layers, Thickness: 1.00-2.00 mm

Performance Data

Water Proffness: ≥ 1 bar/24 hours

Tensile Strength (EN 1542): ≥ 0.8 N/mm²

Tensile Adhesion Strength After Cycling Without De-icing Salts Impact (EN 13687-3 / EN 1542): ≥ 0.8 N/mm²

Resistance to Accelerated Ageing (EN 1062-11): No visual change.

(After 2000 hrs UV radiation and humidity) Crack Bridging (21ºC / -10ºC : EN 1062-7): ≥ 2.5 mm (A5) / ≥ 2.5 mm (A4)

Water-vapor Permeability (EN ISO 7783): Class I; Sd < 5 (Sd: equivalent air thickness)

Carbondioxide Permeability (EN 1062–6): Sd > 50 m (Sd: equivalent air thickness)

Capillary Water Absorption (EN 1062-3): < 0.1 kg/m²h1/2

Service Temperature Range: (-30°C)-(+80°C)

Dangerous Substances: See SDS.

Reaction to Fire: European classification Cs1d0
3151 ELASTICOOL related solutions
View All
Elastomeric Reflective Cold Roofing Solutions