Country and Language Selection
Cancel
There were no results
Home Page Cement Based Waterproofing Products 3031 İZOSEAL 2K
3031 İZOSEAL 2K

3031 İZOSEAL 2K

Two Component Crystallized Waterproofing Mortar

Find a Dealer
Find a Dealer
General Information
Definition
Emulsion polymer based liquid component, water impermeability and containing chemical additives that increase processability Consisting of cement-based powder component, leakage and surface against water internally (negatively) or externally (positively) Applicable to capillary effect, waterproofing and concrete protection fee.
Usage Areas
Indoor and outdoor, vertical and horizontal in applications, In wet areas such as bathrooms, showers and WCs, In water tanks, In waterproofing of foundation and curtain wall, In tunnels, In elevator pits, In brine pools, In fish breeding ponds, It is applied on surfaces such as concrete, plaster and screed.
Package
  • Powder: 25 kg kraft bag Liquid: 3 lt plastic drum. 28 kg set
Features
Resistant to negative and positive water pressure. It has high adhesion strength. It is not corrosive to reinforcement or steel. Can be applied on horizontal and vertical surfaces. It prevents carbonation in concrete. Resistant to freeze-thaw. Easy to apply with brush, roller or spray.
Professional Knowledge

Technical Properties

(at 23 °C and 50% RH)

General Data

Appearance : 1st component: Grey powder;  2nd component: White liquid.

Shelf Life : 12 months when stored in the original sealed packaging

Application Data

Application Temperature : (+5°C) - (+35°C)

Mixing Ratio : 3 lt liquid / 5-6 lt water / 25 kg powder

Mixing : ~3 mins. with max. 500 rpm mixer

Pot Life : ~2 hours

Consumption (per 1 mm thickness) :

For humidity : 0.70 kg/m2
For Non-Pressurized Water: 1.00 kg/m2 
For Pressurized Water: 1.35 kg/m2

Waiting Time Between the Coats : 3 - 6 hours

Time to Waterproof : 7 days

Performance Data

Density  (EN 1015-6) : 1850±100 kg/m3

Impermeability to Water : 4 bar (negative) 7 bar (positive)

Adhesion Strength (EN 1542) : ≥1.00 N/mm2

Adhesion Strength After Cycling Without De-icing Salts Impact (EN 13687-3/ EN 1542) : ≥1.00 N/mm2

Adhesion Strength After Heat Ageing (EN 1062-11/EN 1542) : ≥1.00 N/mm2

Permeability to Water-Vapour (EN ISO 7783-2) : Class I ; Sd <5 m 

Capillary Water Absorption (EN ISO 1062-3) : < 0.1 kg/m²h0.5   

Heat Resistance :  (-30°C) - (+80°C)

Dangerous Substances : See SDS.

Reaction to Fire : European classification Bs1d0