Country and Language Selection
Cancel
There were no results
Home Page Exterior Paints and Plasters DREWA
DREWA

DREWA

Natural Marble Chip Plaster

Find a Dealer
Find a Dealer
General Information
Definition
Acrylic emulsion based, trowel applied, coarse, ready mixed, interior and exterior, natural colored marble chip plaster
Usage Areas
On exterior mineral surfaces such as concrete, mortar, cement panel, etc., on previously painted surfaces and also on interior surfaces for decorative purposes.
Package
  • Available in 25 kg pails
Features
Long lasting; resists to UV rays, rain, heat and frost, thus retains its original properties for years without cracking, blistering and fading. High water vapour permeability allowing the building to breathe. Alkali resistant. Water resistant. Decorative with its natural texture and 30 colors. Solvent free and practically odourless, Water thinnable and ecologically compatible.
Professional Knowledge
Technical Properties (at 23°C and 50% RH)
General Data
• Colors: Available in 30 original colors
• Texture: Contains coarse, natural colored marble chips
• Composition: Acrylic emulsion based
• Thinner: Water
Application Data
• Application Temperature Range: (+5°C) - (+35°C)
• Drying Time: Surface dry after 24 hours and thoroughly dry after 2-3 days. (Lower temperatures and/or higher relative humidity will lengthen the drying process.)
• Consumption: Depending on the evenness of the surface approximately 4.0-5.0 kg/m²
• Application Tools: Stainless steel trowel
• Shelf Life: 12 months in its original sealed packaging and in dry environment
Performance Data
• Water Vapour Permeability SD (m) (TS EN ISO 7783-2): Approx. 0.150
• Water Absorption (kg/m²h0.5) (TS EN 1062-3): 0.100 - 0.500
• Peeling Strength (KgF) (AFNOR T 30706): > 2.5
• Service Temperature: (-30°C) - (+80°C)