Çerezler, içeriği ve reklamları kişiselleştirmek, sosyal medya özellikleri sağlamak ve trafiğimizi analiz etmek için kullanılmaktadır. “Kabul Et” seçeneği ile tüm çerezleri kabul edebilirsiniz veya “Çerez Ayarları” seçeneği ile ayarları düzenleyebilirsiniz.Çerez Politikası
Acrylic emulsion based, photocatalytic (activated by light), silicone enhanced, easy to clean, perfectly scrub resistant, silky matt
interior wall paint.
Usage Areas
On interiors, suitably prepared new mineral surfaces such as concrete, mortar, cement panel, gypsum panel etc. and on old painted surfaces, putty, glass
textile and on wallpaper.
Package
2.5 lt, 7.5 lt and 15 lt pails
2.5 lt packages packed together in 2s
Features
Photocatalytic; by the activation of light it decomposes the harmful materials such as nicotine fume and bad odours transferred by air movements on interior surfaces. Therefore, cleans the air in the room and enables walls to remain clean for a long time.
Silicone enhanced. Cleanable with its perfect scrub resistance therefore stain free.
Asily re-touchable, does not leave brush or roller marks.
High water vapour permeability, allowing the building to breathe.
Superior hiding power.
Solvent free and practically odourless.
Water thinnable and ecologically compatible.
Technical Properties (at 23°C and 50% RH) General Data • Colors: Thousands of colors possible from a mixture of white and A, B, C bases using the Renk Bankası and the Renk Ustası. • Composition: Acrylic emulsion based • Thinner: Water • Density Approx. 1.35 g/cm³ Application Data • Application Temperature Range: (+5°C) - (+35°C) • Drying Time: Recoatable after 6 hours and thoroughly dry after 24 hours. (Lower temperatures and/or higher relative humidity will lengthen the drying process.) • Consumption: Depending on the evenness and the porosity of the surface approximately 0.090 lt/m² per coat • Application Tools: Brush, Roller, Airless spraying equipment Performance Data • Water Vapour Permeability SD (m) (TS EN ISO 7783 - 2): Approx. 0.250 • Scrub Resistance (cycle): (ASTM 2486) >500 • Gloss (60°) (ISO 2813): Approx. 7 • Service Temperature: (-30°C) - (+80°C)