Country and Language Selection
Cancel
There were no results
2300 FUGAFLEX

2300 FUGA FLEX 1-6 MM

Flexible Grouting Mortar (1-6 mm)

General Information
Definition
High performance (high resistance to abrasion and reduced water absorption), cementitious flexible grout for 1 to 6 mm joints.
Usage Areas
Grouting interior and exterior floor and wall in all types and sizes of ceramic tiles, granite, cotto, clinker, glass mosaics, marble, natural stone for 1-6 mm joints, Grouting wet places like swimming pools, water tanks, Grouting places where sudden temperature changes and heavy traffic exist like facades, terraces, over floor heating installations, warehouses.
Package
  • 1 kg, 5 kg polyethylene bags 20 kg multi-ply paper bags
Features
Approved to be used in contact with water intended for human consumption. High flexibility. Good compressive and flexural strength and good resistance to freeze/thaw cycles. Low water absorption. A smooth final surface. w shrinkage, therefore absence of cracks and fissures. Fast curing. Very good abrasion resistance. Ultra-violet and atmosphere resistant 32 different colours.
Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

Appearance: White and coloured powder

Shelf Life: Multi-ply paper bags : 12 months Polyethylene bags :24 months when stored in the original sealed packing in a dry place..

Application Data

Mixing Ratio: 5,8-6,4 liters water / 20 kg powder; 1.45-1.60 liters water / 5 kg powder

Application Temperature Range: (+5°C)-(+35°C)

Pot Life: 1 hour

Set to Light Traffic: 1 day

Consumption: See consumption table depending on width of the joints and dimensions of the tile

Performance Data

Flexural Strength (EN 12808-3): ≥ 2.5 N/mm²

Compressive Strength (EN 12808-3): ≥ 15 N/mm²

Flexural Strength (after freeze/thaw cycles) (EN 12808-3): ≥ 2.5 N/mm²

Compressive Strength (after freeze/thaw cycles) (EN 12808-3): ≥ 15 N/mm²

Abrasion Resistance (EN 12808-2): ≤ 1000 mm³ ,

Shrinkage (EN-12808-4): ≤ 3 mm/m

Water Absorption (after 30 min / 4 hours) (EN 12808-5): ≤ 2 g / ≤ 5 g

Service Temperature Range (after final cure): (-30°C)-(+80°C)