Cookies are used to personalize content and ads, provide social media features, and analyze our traffic. You can accept all cookies with the “Accept” option or you can edit the settings with the "Cookie Settings" option.Cookie Policy

Country and Language Selection
Cancel
There were no results
SUPAR

SUPAR

Water Based, Gloss, Wood, Metal and Masonry Paint

General Information
Definition
Acrylic emulsion based, glossy, long lasting, decorative, exterior and interior wood, metal and wall paint
Usage Areas
On old or new exterior and interior mineral surfaces such as concrete, mortar, cement panel etc., on metal and wood.
Package
  • 0.75 lt, 2.5 lt, 7.5 lt and 15 lt pails 0.75 lt and 2.5 lt packages packed together in 2s
Features
Does not lose its gloss with time does not yellow or crack. Allows second coat application within 3 - 6 hours. With wide range of application; can be applied interior and exterior wood, metal and masonry surfaces. Durable to UV and high temperature; since not solvent based, does not yellow, crack and lose its gloss by time. High water vapour permeability, allowing the building to breathe. Water impermeable; wash and scrub resistance. Alkali resistant. Solvent free and practically odourless. Water thinnable and ecologically compatible.
Professional Knowledge
Technical Properties (at 23°C and 50% RH)
General Data
• Colors: Thousands of colors possible from a mixture of white and A, B, C, bases using the Renk Bankası and the Renk Ustası.
• Composition: 100% Acrylic emulsion based
• Thinner: Water
• Density: Approx. 1.14 g/cm³
Application Data
• Application Temperature Range: (+5°C) - (+35°C)
• Drying Time: Recoatable after 6 hours and thoroughly dry after 24 hours. (Lower temperatures and/or higher relative humidity will lengthen the drying process.)
• Consumption: Depending on the evenness and the porosity of the surface approximately 0.090 lt/ m² per coat
• Application Tools: Brush, roller, airless spraying equipment
Performance Data
• Water Vapour Permeability SD (m) (TS EN ISO 7783 - 2): Approx. 0.400
• Scrub Resistance (cycle)(ASTM 2486): > 800
• Gloss (60°) (ISO 2813): Approx. 80
• Water Absorption (kg/m²h0.5) (TS EN 1062-3): < 0.100
• Service Temperature: (-30°C) - (+80°C)