İs7anbul Antique

The substrate must be cleaned from dust, dirt and oil and should be made sound and dry. For a smooth wall, the entire surface should be levelled with Kale İnce Akrilik Macun or Macunart. The surface is primed with Kale Silastar (Silicone Enhanced Primer) in appropriate colour and the surface preparation is completed. The first layer of İs7anbul Antique, which is converted into mortar by mixing with water, is applied smoothly on entire surface by using a trowel in a way that the first layer is minimum 1 mm.

Before proceeding with the second layer, it must be waited for 5-6 hours for drying of the first layer. During the second layer application, İs7anbul Antique is applied on entire surface smoothly and desired pattern is given on the wet surface by using different application tools such as trowel, brush, roller etc.

Before the application dries, the surface is smoothened with a trowel about 2 hours later. It should be waited for 1 day for complete drying of the surface. Then entire surface is primed with İs7anbul Antique Coat as a single layer and it should be waited for 4-6 hours to dry. If the natural colour of İs7anbul Antique is preferred, the surface can be left like this. In order to give antique effect is different shades, Antique Coat, which is tinted by using Renk Ustası, is applied on the surface which has been primer applied and completely dried, by means on a roller and excessive material is wiped and cleaned by means of a wet sponge. Surface will dry 4-6 hours later.