Natural Stone Coating Solutions

Surface Preparation

It should be ensured that the reinforced concrete or plastered surface are totally cured, free of residues that will prevent adhesion and sound. If there are defects on the application surface, it should be repaired with 4001 Tamirart 5 or 4002 Tamirart 30 repair mortars. If there are structural cracks on the surface, 4004 Tamirart S40 should be used. Extremely absorbent surfaces should be moistened or 4505 Kalekim Astar(Primer) should be applied before application.


Tiling, Grouting and Protection

In natural stone applications to be made on the exterior walls, the product should be selected by taking into consideration the dimensions of the stone in addition to its characteristics such as weight and absorbency. In the application of light coloured natural stones; it should be preferred to use white colour adhesive against the risk of the appearance of the colour of the adhesive which may be caused by the absorption of the stone. White colour options of S1 class flexible adhesive 1054 Technoflex allows bonding of medium-sized natural stones securely on exterior facades. In the joint grouting application, 2300 Fugaflex flexible grouting mortar should be used for completing the system. For protection of natural stones especially on exterior walls, impregnation insulation and surface protection material can be provided with 3351 Durex or 3353 Profesyonel Durex(ready to use) in order to ensure water impermeability.

Depending on the absorption rate of the stone; it is appropriate to use water with Durex with the correct dilution rate. In extremely absorbent stones, protection can be ensured by forming a film layer on the stones by using 8251 Seracare Surface Protector.



APPLICATION LAYERS

1. Plastered Surface    
2. Kalekim Astar (Primer)
3. Technoflex      
4. Natural Stone
5. Fugaflex        
6. Durex