Cookies are used to personalize content and ads, provide social media features, and analyze our traffic. You can accept all cookies with the “Accept” option or you can edit the settings with the "Cookie Settings" option.Cookie Policy

Country and Language Selection
Cancel
There were no results
1062 TECHNOPOOL

1062 TECHNOPOOL

Tile Adhesive for Waterproofing Systems (C2TE S2)

General Information
Definition
High performance, flexible, water resistant cementitious adhesive with extended open time and reduced slip for ceramic tiles and stones.
Usage Areas
Interior and exterior floor and wall bonding of all types and sizes of ceramic tiles, natural stone, marble, granite, porcelain ceramic, clinker, cotto on cementitious renders, cementitious screeds and concrete, Bonding of all types and sizes of tiles and glass mosaics in swimming pools, Turkish baths, water tanks, basins and any other wet place. Bonding of ceramic tiles or granite on existing granite, ceramic, marble, Bonding of tiles on places where sudden temperature changes occurs like cold storage depots and over floor heat installations, Bonding of tiles on places subject to heavy traffic like shopping malls, hospitals, schools.
Package
  • 25 kg multi-ply paper bags
Features
Perfect adherence. Highly deformable, resistant to temperature changes. Waterproofing. Extended open time. Can be applied on vertical surfaces even for bonding of heavy tiles without sagging. Easily trowellable.
Professional Knowledge

Technical Properties 
(at 23°C and 50% RH)
General Data
Appearance: Grey or White powder
Shelf Life: 12 months when stored in the original sealed packing in dry place
Application Data
Application Temperature Range: (+5°C)-(+35°C)
Mixing Ratio: 5.75-6.25 liters water / 25 kg grey powder

                    6.25-6.75 liters water / 25 kg white powder
Pot Life: 6 hours
Grouting: 8 hours on wall; 24 hours after on floor
Consumption: 3-5 kg/m²
Performance Data

Slip (EN 1308): ≤ 0.5 mm
Open Time (EN 1346): After 30 minutes ≥ 0.5 N/mm²

Tensile Adhesion Strength (EN 1348):
- initial (after 28 days): ≥ 1 N/mm²
- after heat exposure: ≥ 1 N/mm²
- after immersion in water: ≥ 1 N/mm²
- after freeze/thaw cycles: ≥ 1 N/mm²
Deformability (EN 12002): ≥ 5 mm-S2 Highly deformable
Service Temperature Range (after final cure): (-40°C)-(+80°C)
Release of Dangerous Substances (EN 12004): See SDS.
Reaction to Fire: A2