Country and Language Selection
Cancel
There were no results
Home Page Cement Based Waterproofing Products 3025 ULTRALASTIC
3025 ULTRALASTIC

3025 ULTRALASTIC

Waterproofing and Concrete Protection Mortar

Find a Dealer
Find a Dealer
General Information
Definition
Rapid curing, highly flexible, resistant to sulphate and durable waterproofing and concrete protection mortar for interior and exterior applications, composed of emulsion polymer based liquid component and powder component including waterproofing, and workability improving mineral additives, and special elements.
Usage Areas
Waterproofing of; Underground concrete elements like foundations, retaining walls, basement walls. The soil contacting areas of concrete elements. Permanently wet areas like swimming pools and water basins. Wet areas like bathrooms, showers. Wall interfaces. Balconies and terraces. The areas subject to saline water. Concrete basins subject to sea water and de-icing salts. Concrete, plaster and screeds. Waterproofing under ceramic tiling. Waterproofing over old tiling. All places where quick installation is needed.
Package
  • 12 kg bag 8 l plastic pail 20 kg set
Features
Thanks to its fast setting feature, it can be started 3 hours later application of tile and light pedestrian traffic after 2nd coat applied. Resistant to rain within 2 hours, to pressurized water within 16 hours after application. Resistant to ageing and UV light. Excellent bonding on all concrete and masonry Highly flexible. It can be painted or covered with a covering material in a short period of time after application. Allows further application over the surface rapidly, paintable. Applicable both on horizontal and vertical surfaces. Prevents carbonation in concrete. Resistant to freeze-thaw. Prevents concrete against de-icing salts like calcium and sodium chloride, seawater and carbon dioxide gas. Easy to apply either by brush, roller or trowel.
Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

Appearance 1st component: Grey powder 2nd component: White liquid.

Shelf Life (Powder and liquid) 12 months when stored in the original sealed packaging.

Application Data

Application Temperature Range (+5°C) – (+25°C)

Mixing Ratio 8 lt liquid / 12 kg powder

Mixing ~3 mins. / 400-600 rpm

Pot Life 45 minutes Consumption Areas subject to water at a normal level 2.4 kg/m² (2 layers)

Waterproofing against permanent water pressure at balconies and terraces, pools and water tanks 3.2 kg/m² (2 layers)

Soil contacting concrete elements and foundations: 4.5 kg/m² (3 layers)

Waiting Time Between Coats 1.5 hours

Waiting Time Before Tiling 3.0 hours

Curing Time Max.12 hours (regardless of weather conditions)

Performance Data

Density (mixture) :1.45 ± 0,1 g/cm3

İmpermeability to Water (EN 14891) :≥7 bar after 6 hours ( positive 28 days)

Tensile Adhesion Strength (EN 14891) : ≥0.5 N/mm²

Tensile Adhesion Stregth After Water Contact /Heat Treating / Freeze Thaw Cycle (EN 14891) : ≥0.5 N/mm²

Crack Bridging (EN 14891) : ≥1.50 mm (+23 °C) ≥1.00 mm (-5 °C)

Adhesion Strength (EN 1542) : 3 hours: ≥ 0.5N/mm² 24 hours: ≥ 1.0 N/mm² 28 days: ≥ 1.5 N/mm²

Adhesion Strenght After Cycling Without De-icing Salts Impact (EN 13687-3/ EN 1542) : ≥ 1.0 N/mm²

Crack Bridging (EN 1062-7) : ≥ 3.0 mm (A5) (21 ºC)

Capillary water absorption (EN 1062-3) : <0.1 kg/m²h0.5

Heat Resistance : (-40°C) - (+80°C)

Dangerous Substance : See SDS.