3403 PROFESYONEL 2K+

Waterproofing Material

Find a Dealer

Definition

Highly flexible, two component, polymer modified, bitumen emulsion based, fiber reinforced, solvent free waterproofing material.

Usage Areas

Waterproofing of; Sub-base building structure surfaces (horizontal/vertical) which are permanently contact with leakaging or pressurized water and moisture, Foundations, retaining walls and basement walls, green terraces, sub-base car parking areas, basement floors, Interior and exterior mineral surfaces like concrete, stone, brick, plaster, mortar etc.

Package

Liquid: 24 kg, Powder: 8 kg. Available in A+B component 32 kg plastic pails.

Features

Fiber reinforced. Flexible and crack-bridging. Can be used on brick walls without plastering and provide adherence. Easy to apply (by brush or trowel) on both vertical and horizontal surfaces. Forms a seamless moisture and waterproofing membrane. Resistant against conditions where substrate is exposed to several factors such as salt solutions, chemicals in regular soil, weak acids. Performance will remain the same for several years. Resistant to freeze-thaw cycles. Suitable for areas and surfaces where vibration or motion is present. Solvent free.

Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data

Appearance: 1st component: Black-brown liquid; 2nd component: Grey powder

Shelf life: 12 months when stored in original sealed packaging

Solid content ratio: A Component: 56% ; A+B Component: 68%

Application Data

Application Temperature: (+5°C)-(+35°C)

Application Thickness For moisture resistant insulation min. 3 mm dry film thickness For non-pressure water resistance min. 3 mm dry film thickness For pressure water resistance min. 4 mm dry film thickness

Mixing Ratio: 24 kg liquid / 8 kg powder

Consumption: Approx. 1.0 – 1.5 kg / m² for each 1 mm thickness. (The consumption amounts are theoretical and it varies by the condition of application surface)

Tack-free drying time: 6 hours

Waiting Time Between the Coats: 1-2 hours (depending on the weather conditions)

Complete Drying Time: 1-5 days

Ready to Use Time: 7 days (depending on the curing time)

Performance Data

Density: 1,10± 0,03 gr/ml Crack Bridging (EN 15812): Class CB2

Waterproofing Capacity: Class W1 (3 mm dry film thickness)

Resistance to Water (EN 15817): Pass

Low Temperature Flexibility (EN 15813): Pass

High Temperature Dimensional Stability (EN 15818): Pass

Durability (EN 15820 & EN 15817): Pass

Reaction to Fire (EN 13501-1): Class E