2400 FUGAFLEX RAPİD

Rapid Setting Flexible Grout

Find a Dealer

Definition

High performance, high resistance to abrasion and reduced water absorption, rapid setting cementitious flexible grout for 2 to 20 mm joints.

Usage Areas

Grouting of all types and sizes of ceramic tiles, granite, cotto, clinker, glass mosaics, marble, natural stones with 2-20 mm joints at interior and exterior floors, and walls. Grouting of tile on places subject to heavy traffic like (shopping malls, hospitals, hotels, private houses, etc.) Grouting wet places like swimming pools, water tanks. Grouting places where sudden temperature changes and heavy traffic exist like facades, terraces, underfloor heating installations, warehouses.

Package

5 kg seaux en plastique.

Features

Fast setting: it is ready for use and light foot traffic after a short period of time. High flexibility. Low water absorption. Resistance to efflorescence and cracks. Very good abrasion resistance. 10 different colours that are resistant to UV lights and climatic changes.

Professional Knowledge

Technical Properties
(at 23°C and 50% RH)
General Data
Appearance: White and coloured powder
Shelf Life: 24 months when stored in the original sealed packing in a dry place.
Application Data
Mixing Ratio: 1.1-1.2 liters water / 5 kg powder
Application Temperature Range: (+5°C)-(+35°C)
Pot Life: 1 hourSet to Light Traffic: 1 day
Grouting after installation: On walls bonded with normal adhesive: 4-8 hours
On walls bonded with fast-setting adhesive: 1-2 hours
On floors bonded with normal adhesive: 24 hours -
On floors bonded with fast- setting adhesive:3-4 hours
Set to Light Traffic 5 hours

Consumption: See consumption table depending on width of the joints and dimensions of the tile
Performance Data
Flexural Strength (EN 12808-3): ≥ 5 N/mm²
Compressive Strength (EN 12808-3): ≥10 N/mm² (6 hours); ≥25 N/mm² (28 days)
Flexural Strength (after freeze/thaw cycles) (EN 12808-3): ≥ 5 N/mm²
Compressive Strength (after freeze/thaw cycles) (EN 12808-3): ≥ 25 N/mm²
Abrasion Resistance (EN 12808-2): ≤ 500 mm³ Shrinkage (EN-12808-4): ≤ 3 mm/m
Water Absorption (after 30 min / 4 hours) (EN 12808-5): ≤ 2 g / ≤ 5 g
Service Temperature Range (after final cure): (-30°C)-(+80°C)