Country and Language Selection
Cancel
There were no results
2700 ULTRA FUGA FLEX TOZUMAZ

2700 ULTRA FUGA FLEX DUST-FREE

Silicone Enhanced Flexible Grouting Mortar (2-20 mm)

General Information
Definition
High performance (high resistance to abrasion and reduced water absorption), dust-free cementitious, silicone enhanced grout for 2 to 20 mm joints.
Usage Areas
Grouting interior and exterior floor and wall in all types and sizes of ceramic tiles, granite, cotto, clinker, glass mosaics, marble, natural stone, antıqued marble for 2-20mm joints. Grouting wet places like swimming pools, water tanks. Grouting places where sudden temperature changes and heavy traffic exist like facades, terraces, over floor heating installations, warehouses. Floor and Wall grouting of places like bathrooms,showers,balconies and kitchens.
Package
  • 20 kg multi-ply paper bags.
Features
User friendly with dust-free technology. Less prone to dirtiness,easy to clean. Low water absorption with water reppelency. Resistant to fungee&yeast growth. Approved to be used in contact with water intended for human consumption. Low shrinkage,therefore absence of cracks and fissures. Very good abrasion resistance. Good compressive and flexural strength and good resistance to freze/thaw cycles. Fast curing. A smooth final surface. Low water absorption. Ultra-violet and atmosphere resistant.
Professional Knowledge

Technical Properties

(at 23°C and 50% RH)

General Data:

Appearance: White and coloured powder

Shelf Life: 12 months when stored in the original sealed packing in dry place.

Application Data:

Application Temperature Range: (+5°C) - (+35°C)

Mixing Ratio:5.2-6 litres water /20 kg powder

Pot Life:30 minutes

Set to Light Traffic:1 day

Consumption:See consumption table depending on width of the joints and dimensions of the tile.

Performance Data:

Flexural Strength (after 28 days) (EN 12808-3): ≥ 2.5 N/mm²

Compressive Strength (after 28 days) (EN 12808-3)≥ 15 N/mm²

Flexural Strength (after freeze)/thaw cycles) (EN 12808-3)≥ 2.5 N/mm²

Compressive Strength (after freeze/thaw cycles) (EN 12808-3)≥ 15 N/mm²

Abrasion Resistance (EN 12808-2)≤ 1000 mm³

Shrinkage (EN-12808-4)≤ 3 mm./m. Water Absorption after 30 min / 4 hours ≤ 2 gr. / ≤ 5 gr.

Service Temperature Range (after final cure): (-40°C) - (+80°C)