Country and Language Selection
Cancel
There were no results
Home Page Sealants and Grabs 1404 TECHNOBOND MS
1404 TECHNOBOND MS

1404 TECHNOBOND MS

MS Polymer Adhesive

Find a Dealer
Find a Dealer
General Information
Definition
MS polymer-based, one component, high quality and professional adhesive with high adhesion strength and initial tack.
Usage Areas
Filling and sealing the gaps between the shower cabin, tub and tiles during the shower cabin installation.
Package
  • 290 ml cartridge / 12 cartridges in box 600 ml sausage / 20 sausages in box
Features
High initial tack. Suitable for bonding heavy building materials without use of clamps and/or fixing tape. Waterproof, cures with moisture. One component. Adheres to all types of surfaces. Over-paintable. Does not lose volume. Resistant to temperature extremes and aging. Does not need primer (preliminary test recommended). Excellent elasticity and very good adhesion strength. Does not contain solvent, silicone or isocyanate.
Professional Knowledge
Technical Properties
  (at 23°C and 50% RH)
General Data
Appearance: White, Black or Grey coloured adhesive 
Density :  1.49 ± 0.03 gr/ml
Shelf Life :  9 months in original sealed packaging.
Application Data
Application Temperature Range:  (+5°C) - (+40°C)
Tack Free: 15-20 min.
Curing Rate : Approx. 3.5 mm/24 hr
Performance Data
Hardness Shore A (DIN 53505): 55 ±5
Elongation at Break % (ASTM D412)
≥ 300%
Volume Loss : ≤  10%
Tensile Strength (ASTM D412)
Sagging (ISO 7390) : ≤ 3 mm
Temperature Resistance : (-40°C) - (+90°C)